A TecMe Kidney for 3 connections. The kidney is thicker than the 2 connections kidney (more place for resistor net and cables) The three chambers are cylindric and deeper than 3 cm! The top lid has been changed (easily) to fit the thicker kidney. The height of the complete head is unchanged. Connected equipment: Shearwater Pursuit Shearwater Petrel RBG HUD A very nice job made by Martin at tecme.de

Current diluent is verified through a minimal dil. spray on sensor 3. The ADV is disconnected since many years. The ADV chamber is used as below. A Kiss MAV (orifice plugged) is connected from the diluent manifold to the ADV chamber. The ADV membrane is replaced by a thick (1 mm) rubber A transparent hose (outer dia 9 mm) is directly aimed at sensor 3 surface. A Coca Cola bottle cap is perfectly pegging the hose. A gentle 3 second spray is sufficient to verify that sensor 3 reads the ppO2 for the diluent on current depth. If the bottle cap stands the Coke, it probably stands the cannister environment!

Kiss Classic on alu backplate and side mount tanks. On back: Cannister, batteries and suit gas tank. Sidemount: Up to 4 tanks. Both oxygen tanks are equipped with a Kiss Mav and are connected by QC6 (f) to (m). Both diluent tanks are connected by QC6(m) to (f). Since both dil. tanks are connected, gas switch is CHOOSEN by opening the "next" dil tank valve and then closing the previous dil tank valve and is then VERIFIED by a dil spray on sensor 3. CURRENT diluent is available in ALL 3 second stages: BOV and second stages on BOTH dil tanks. (buddy safe) Air tank has the long hose.

Filtret 2 cm närmre, Tankarna 12 cm "närmre", Lättare, Bredd 49cm